Klean Oils

The Key Components of an Oil Dialysis System

Oil Dialysis System Components

An oil dialysis system is simple to describe and exacting to specify. It takes a controlled side-stream of oil from a working circuit, conditions it, and returns it — continuously, while the machine runs. Understanding the component groups that do this makes it far easier to judge whether a proposed installation suits your equipment. Klean Oils is a distributor of the unique, patented ECO (Lube) Oil Dialysis Technology, providing sustainable solutions while saving costs and protecting your machinery.

The Side-Stream Circuit

Everything begins with the take-off and return. Oil is drawn from the system at a point representative of the bulk charge, passed through the dialysis unit, and returned where it will mix properly rather than short-circuit straight back to the suction. Line sizing, routing and isolation provision decide whether the unit can be serviced without taking the host machine out of service — a detail that quietly determines how well the system is looked after over its life.

The Conditioning Stage

This is the heart of the system and the reason dialysis is not simply extra filtration. Where a full-flow filter traps particles above its rated size, the conditioning stage is designed to address the wider contamination spectrum that actually condemns oil: fine suspended solids, water, and the volatile and acidic products of degradation. The target contaminant in a given application — soot in a diesel engine, water in a marine gearbox, fine particulate in a hydraulic circuit — drives how this stage is configured.

Flow, Control and Protection

Flow through the side-stream must be steady and modest; the aim is to turn the whole charge over many times between oil samples, not to move oil quickly. Control and protection elements — pressure and differential indication, thermal management where the duty requires it, and safeguards that protect the host machine if the unit is isolated or an element reaches the end of its life — keep the installation benign. A dialysis system should never become a single point of failure for the equipment it protects.

Servicing and Consumables

Every dialysis installation has a service element that is eventually replaced. Planning for that access at installation, and logging each change against oil analysis results, is what turns a piece of equipment into a maintenance programme with a defensible record behind it.

Specification and Engineering

Klean Oils is wholly owned by Klean Industries. Component selection, integration and commissioning for larger installations can be supported through the group’s design and engineering, feasibility and turn-key project services.

Specify the Installation Properly the First Time

Take-off point, flow rate, conditioning duty and service access decide whether an oil dialysis system performs for years or becomes a maintenance nuisance.

Klean Oils is a distributor of the unique, patented ECO (Lube) Oil Dialysis Technology and is wholly owned by Klean Industries.

Want an engineer to review your lubrication circuit?

Contact Klean Industries about oil dialysis system components » GO.